一、産品介紹（Introduction水很）： 

納米晶材料同時具備矽鋼、坡莫合金和鐵氧體件技的優點，高頻逆變電源的工作(zu電麗ò)頻率在20kHz~50kHz，作(zu紙市ò)為電源心髒的主變壓器，傳統的鐵芯材料鐵氧體雖行樂高頻損耗較低，但其100kHz以下中綠頻段的磁導率較低，且其飽和磁他服感應值（Bs）較低，鐵芯的體積和重量美紅仍較大，此外，鐵氧體的居裡溫度較低，熱說地穩定性差，溫度稍高即導緻Bs值降低，易飽和，工作狀态樹民不穩定，不适合于高頻大功率下使用。納米晶材料，但體具有優良的綜合磁性能，特别是應用舞低在高頻大功率逆變電源上鐵芯的首選。納米晶鐵芯不僅為好用于逆變焊機電源，而且廣泛用于電解電鍍設備、感應加熱數動設備、充電設備、通信電源、UPS電源、X光機電源刀遠、激光電源、變頻調速電源等領域。

Nanocrystalline mater熱開ials have a combination advan討通tages of silicon steel, permalloy得妹 and ferrite, the working f花通requency of high freque書服ncy inverter power supply美著 is 20 kHz ~ 50 kHz, as the heart也照 of main power supply transformer, 吃花although the traditional ferrite co購高re material loss at high frequency is北場 low, but the permeab劇舊ility of below 100 kHz frequenc為你y is relatively low, a低鄉nd its saturation magn舞人etic flux density value (Bs) is動煙 also low, the volume and有日 weight of the iron core is st長說ill large. In addition,務唱 because of low Curie temperature聽腦, weak thermal stability, Bs  val機妹ue decreases quickly when lit分錯tle temperature rise, easy to s體月aturation and working condition 輛雜is not stable, ferrite is 業姐not suitable for high frequency powe慢但r. Nanocrystalline materials have些月 excellent comprehensive magnet內件ic properties, especially a數大pplicable in high-power and high刀山-frequency inverter power core. N刀報anocrystalline core not only used in in線些verter welding machine power sour近器ce, but also widely used in e作林lectrolytic plating e金路quipment, induction heatin些窗g equipment, charging equipment, 是黃communication power 紙員supply, UPS power supply, X事線-ray source, laser power supply, freq雨內uency conversion pow唱山er supply, etc.

二、産品特點（Characteristic）： 

—高飽和磁感應強度-有效縮小變壓器體書船積

High saturate induction道能—reduce volume of trans新美formers

—高導磁率低矯頑力-提高變壓器效率、減小激磁功率、降低(影照dī)銅損

High permeability and low coercivity—im兵林prove efficiency, lower exciting 金動power and reduce copper loss

—低損耗-降低變壓器的溫升

Low core loss—reduce temperature rise北放 of transformers

—優良的溫度穩定性-可在-55~130℃長期工作

Excellent thermal stability—w照訊ith the serving temperature會到 of -55℃~130℃ for long t都愛ime

三、産品應用（Application）：

·逆變焊機電源 （Inverter welding machine pow錯電er source）

·電解電鍍設備 （Electrolytic plati喝制ng equipment）

·感應加熱設備 （Induction h白讀eating equipment）

·充電設備 （Charging equipment）分下

·通信電源 （Communication power supply）

·UPS電源 （UPS power sup那術ply）

·X光機電源 （X-ray source）

·激光電源 （Laser power supply）

·變頻調速電源 （Frequency con生又version power supply, 習短etc.） 

四、特性曲線（Special characteristic curve）：

1.納米晶與鐵氧體鐵芯靜态磁滞回線對比

(Static Hysteresis Loop Com地在parison Between Nanocrystalline and Fer筆很rite Cores)

2.納米晶與鐵氧體鐵芯損耗對比

(Core Loss Comparison民劇 Between Nanocrystalline and 雜司Ferrite Cores)

3.不同帶厚鐵芯損耗對比

(Core Loss Compariso雨窗n of Nanocrystalline Cores Made of讀能 Different Thickness 西哥Ribbon)

4.納米晶與鐵氧體鐵芯使用溫度範圍及其溫度穩定性對比

(Operation Temperature Ra門校nge and Stability Co志現mparison Between Nanocrystall友西ine and Ferrite Cores)

納米晶居裡溫度570℃，傳統鐵氧體的居裡溫資雜度僅200℃，在-40℃～+140℃溫度範圍内，納米晶鐵芯主要磁特性變化(h微對uà)率小于10％，而傳統的鐵氧體卻高達50%以上，相制用納米晶鐵芯制造的濾波器件,可以更畫河好地應用于高溫環境，更适短小應環境變化。

The curie temperature門熱 of nanocrystalline 黑信material is 570℃ and tha下說t of ferrite is only 200℃. The 算老main performance of nanocrys電對talline cores change less訊舞 than 10% at the range from -40℃ t站讀o +140℃. But the changing rate of f離就errite is more than 50%資還. Filters made of nanocrysta這妹lline cores can be better a市對pplied to high-temperature environment 訊草and adapt to environment change.

 一、尺寸圖示（Size Chart）：

二、産品選型表（Product selection table）：